AST/UST Miscellaneous
- Step 1 - Review and Prepare
- Step 2 - Create an Account
- Step 3 - Apply
- Step 4 - Review and Payment
- Step 5 - Schedule an Inspection
Review and Prepare
Please review the information packets pertaining to your project below:
- Private Motor Vehicle Fuel-Dispensing (PDF)
- Unattended Private Fuel Dispensing (PDF)
- Unattended Public Fuel Dispensing (PDF)
The following information needs to be available for entry and upload during the online application process.
- Description of Overfill Protection
- Description of Spill Protection
- Description of Leak Detection
- Description of Material Beneath the Tank(s)
- Canopy (if applicable)
- Description of Normal Venting System
- Emergency Venting Size
- Description of Signage and Labeling
- Dispenser Type
- Breakaway Safety Device Type
- Electrical Classifications
- Description of Dispensing Line Type
- Description of Venting Line Type
- Anchoring/Ballast Calculations
- Monitoring Equipment
- Backfill Material Type
The following documents need to be available for upload during the online application process. Please note, all documents need to be in a PDF format.
- Detailed Plot Plan Showing:
- New and Existing Tank Locations
- Liquefied Petroleum Tanks
- Property Lines
- Roadways
- Driving Surfaces
- All Structures
- Surface Waters
- All Utilities
- Canopies
- Piping Layout
- Dispenser Location
- Emergency Controls
- Portable Fire Extinguishers
- Manufacturer Specification Sheets for:
- Tanks
- Pumps
- Valves
- Piping
- Hose
- Nozzles
Permit fees are payable online during the application process, please have payment information ready.
Fee Schedule (PDF)
Create an Account
-
Are you a new user?
Create an AccountPlease Note:
Contractors applying for a permit on behalf of a homeowner must setup a User Account and then a Pro Account.
Homeowners doing your own work may setup a User account only.New users to the system need to create an account. Please select create an account.Creating a New User in iMS and iMS Tips
Having trouble creating an account? Detail instructions are available:Already have an account?
Create a PRO Account
A PRO account is for contractors that require any city or state license or registration.
Please note, Architects are able to apply for a permit for new commercial buildings without being a PRO account.Creating a Pro Account in iMS
Having trouble creating a PRO account? Detail instructions are available:
Online Application
Once you have gathered or emailed the necessary documents, you are ready to begin the online application process.
Please note the following:
- Once the application is started, the system will not allow you to go back to a previous page, you must continue through the entire application.
- Once you have completed and uploaded all required documents, a review page allows you to go back and edit any part of the application.
- Any question or upload with a red asterisk (*) is required.
Review and Payment
-
- Review time is up to 15 business days. Please note, during the busy construction months and with the online software launch, delays may occur.
-
Permit fees are payable online during the application process, please have payment information ready.Fee Schedule (PDF)
- After permit has been reviewed and approved, an email will be sent indicating plans and permits can be picked up at city hall.
Schedule an Inspection
-
When scheduling inspections, please plan at least three to four business days ahead.
Please note, during the busy construction months longer delays may occur.-
Information needed before calling to schedule an inspection:
- Permit number.
- Address for the job site.
- Inspection type.
- If you are the homeowner, need the name of contractor doing the work.
- Call Fire Inspections at 763-785-6187 to schedule.
-